Loading... Please wait...
  • Image 1
  • Image 2

1 Gal. Jug Dura-Stain Acid Stain (Proline)

Call or request a quote
SKU: FCC_UMB-PROAcidStain
Brand:
Proline

1 Gal. Jug Dura-Stain Acid Stain (Proline)
Proline
FCC_UMB-PROAcidStain
Quantity:
Special Instructions:

FCC_UMB-PROAcidStain

Dura-Stain Acid Stain - 1 Gallon

Proline Dura-Stain is a chemical reactive stain developed to permanently transform ordinary concrete surfaces into the beautiful, variegated look of polished stone. It is available in the widest array of natural colors possible in a mineral-based reactive stain, giving the applicator a solid, earthy palette to work from. Reactive stains are water-based stains made with a weak solution of acid and minerals that react with the free lime available in the surface of fully cured concrete. The effect is a variegated, marbleized finish that uses the imperfections in a concrete surface rather than covers them up. It is possible to achieve even more interesting shades and colors by using Dura-Stain over concrete surfaces colored with Proline Color Hardener and Antique Release Agent. Plus, create a dazzling combination of effects with stampable impressions and Dura-Stain Reactive Stain using Proline stamps and tools.

Preparation
Concrete should be sufficiently cured before application of Proline Dura-Stain. The surface should be free of any contaminants that may impede the penetration and reaction of the stain. It is recommended to pressure wash or scrub the concrete surface with a detergent prior to application rather than acid wash which removes minerals necessary for the reaction of the stain.

Coverage
One gallon will cover approximately 200 to 400 square feet at full strength, or may be diluted up to 20:1 for lighter colors that will yield greater coverage rates

Application
For professional use only. Protect surrounding areas prior to application. It is recommended that all persons applying these materials fully read and comprehend Material Safety Data Sheets and Dura Stain Tech Data Sheet. The color of the Dura-Stain in-bottle solution will not resemble the final color but will change as the reaction occurs. It is best to apply Dura-Stain to pre-moistened concrete to help soften any application lines and edges. Dura-Stain Acid Stain may be applied in small areas by brush and large areas by pump-type, non-metallic, acid-resistant sprayers with plastic tips. Apply the stain into deliberately expanding areas while working back into completed sections to avoid lap marks. Allow the stain solution to remain in contact with the concrete until the desired effect is obtained, a minimum of 4 hours. Apply additional coats in the same manner, normally allowing the residue to remain on the surface between coats. After the reaction has subsided, the application area may be flushed and scrubbed with a stiff brush for a softer, more blended color. Once the reaction is over and the desired color is reached, usually from 4 to 24 hours, the surface should be neutralized with a solution of a recommended acid neutralizer such as household ammonia or baking soda. The surface should then be thoroughly rinsed with clean water. Keep cleaning concrete surface until rinse water appears clean. Once rinsing has begun, do not allow residue to dry on substrate until substrate is completely clean and neutralized. Color streaking may occur if residue is allowed to oxidize. Collect run-off by wet vacuuming or absorbing with an inert material. Dispose of all stain residue and materials in accordance with local, state, and federal regulations.

Sealing
Surface should be completely dry, usually a minimum of 24 hours after last surface rinsing, and swept clean before being sealed with recommended Proline Sealer. 

adobe-pdf-file-icon-32x32.png Dura Stain Acid Stain Color Chart

Join us for exclusive deals and new releases!

  • Farrell News
  • Recent Updates

    View Cart Go To Checkout