Loading... Please wait...
  • Image 1

50 lb Bag Xypex Admix C-1000 (Xypex)

Call or request a quote.
SKU: XYP1050

50 lb Bag Xypex Admix C-1000 (Xypex)
Xypex Chemical Corporation
XYP1050
Quantity:
Special Instructions:

XYP1050

Xypex 50 lb Bag Xypex Admix C-1000

Description
Xypex is a unique chemical treatment for the waterproofing, protection and improvement of concrete. XYPEX ADMIX C-1000 is added to the concrete mix at the time of batching. Xypex Admix C-1000 consists of Portland cement, very fine treated silica sand and various active, proprietary chemicals. These active chemicals react with the moisture in fresh concrete and with the by-products of cement hydration to cause a catalytic reaction which generates a non-soluble crystalline formation throughout the pores and capillary tracts of the concrete. Thus the concrete becomes permanently sealed against the penetration of water or liquids from any direction. The concrete is also protected from deterioration due to harsh environmental conditions.

Xypex Admix C-Series
The Admix C-Series has been specially formulated to meet varying project and temperature conditions. Xypex Admix C-500 is specifically formulated to meet modern concrete practices that incorporate additives such as fly ash and slag. For most concrete mix designs adding the Admix C-500 will have minimal or no effect on settinG time. Xypex Admix C-1000 is designed for typical Portland cement-rich concrete, where normal to a mild retarded set is desired. Xypex Admix C-2000 is designed for projects where extended retardation is required due to high ambient temperatures or long ready-mix delivery times. See Setting Time and Strength for more details. Consult with a Xypex technical services representative for the most appropriate Xypex Admix for your project.

Recommended for:
• Reservoirs
• Sewage and Water Treatment Plants
• Secondary Containment Structures
• Tunnels and Subway Systems
• Underground Vaults
• Foundations
• Parking Structures
• Swimming Pools
• Precast Components
Advantages
• Resists extreme hydrostatic pressure from either positive or negative surface of the concrete
• Becomes an integral part of the substrate
• Highly resistant to aggressive chemicals
• Can seal static hairline cracks up to 0.4 mm
• Allows concrete to breathe
• Non-toxic
• Less costly to apply than most other methods
• Permanent
• Added to the concrete at time of batching and therefore is not subject to climatic restraints
• Increases flexibility in construction scheduling

Packaging
Xypex Admix C-1000 is packaged in 60 lb. (27.2 kg) pails and 50 lb. (22.7 kg) bags. Admix C-1000 is also available in cartons containing 10 lb. (4.5 kg), 12 lb. (5.5 kg), and 15 lb. (6.8 kg) soluble bags. For specific projects, contact the manufacturer for availability of custom sized packaging.

Storage
Xypex products must be stored dry at a minimum temperature of 45ºF (7ºC). Shelf life is one year when stored under proper conditions.

Dosage Rates
Xypex Admix C-1000:
2% - 3% by weight of cement
Xypex Admix C-1000 NF (No Fines Grade):
1% - 1.5% by weight of cement
NOTE: Under certain conditions, the dosage rate for No Fines Grade may be as low as 0.8% depending on the quantity and type of total cementitious materials. Themaximum use level is 2% by weight of cement for potablewater applications.

Consult with Xypex’s Technical Services Department for assistance in determining the appropriate dosage rate and for further information regarding enhanced chemical resistance, optimum concrete performance, or meeting the specific requirements and conditions of your project.

Join us for exclusive deals and new releases!

  • Farrell News
  • Recent Updates

    View Cart Go To Checkout