Loading... Please wait...
  • Image 1
  • Image 2
  • Image 3

10" Contractor Saw (SawStop)

Contiguous 48 States
$150.00 (Fixed shipping cost)

10" Contractor Saw (SawStop)
Special Instructions:


Sawstop Contractor Saw

All-purpose versatility, reliability and safety for a variety of users. 

The SawStop Contractor Saw offers versatility and safety in the shop and stability and mobility on the jobsite. It delivers the performance you need with the peace of mind only SawStops patented safety system can provide. The SawStop table saws unique brake design detects hand or finger contact with the saw blade within milliseconds, instantly stopping and retracting the blade, helping to avoid serious injury. The fit, finish and tolerance levels are second to none. Includes: 1-3/4 HP Saw with stand, 30" Aluminum Extrusion Fence System, 10" 40-tooth combination blade, two stamped wings, blade guard assembly, miter gauge, riving knife, blade wrenches and owners manual.

  • Cast-iron center table, stamped steel wings upgradeable to cast-iron
  • Multi-terrain and integrated mobility options
  • Open base, table-mounted trunnion, exterior motor
Model Options:
  • CNS175-SFA30: 30” Rip Capacity & Aluminum Extrusion Fence (58-1/2" W, 40" D, 34-3/4" H}
  • CNS175-TGP36: 36” Rip Capacity & T-Glide Fence Assembly (69-1/8" W, 45" D, 34-3/4" H)
  • CNS175-TGP52: 52” Rip Capacity & T-Glide Fence Assembly (85-1/4" W, 45" D, 34-3/4" H)
Motor: (all 60Hz, TEFC): 1.75 HP
Cabinet footprint: 25 3/4" w x 27" d
Cast iron table: 20″ w x 27″ d
Cast iron table (w/ extension wings): 44″ w x 27″ d (w/opt. cast iron wings)
Extension wings: 12″ w x 27″ d each
Extension table 30 in rails: N/A
Extension table 36 in rails: 23 3/4″ w x 27″ d
Extension table 52 in rails: 40 1/8″ w x 27″ d
Weights - table saw only: 225 lbs
Weights - w/ 30 in fence systems: 245 lbs
Weights - w/ 36 in fence systems: 310 lbs
Weights - w/ 52 in fence systems: 335 lbs
Weights - (optional cast iron wings): 35 lbs each
Shipping weight (approx.): 240 lbs (table saw only)
Blade: 40-tooth, prof. grade, 5/8″ arbor
Blade diameter: 10"
Blade tilt: Left
Blade kerf: 0.118″ (3mm)
Blade plate thickness: 0.078″ (2mm)
Max. depth of cut, blade at 0º: 3 1/8″
Max. depth of cut, blade at 45º: 2 1/4″
Max. rip, right of blade - 30 in: 30 1/2″ (w/ 30″ rails)
Max. rip, right of blade - 36 in: 36 1/2″ (w/ 36″ rails)
Max. rip, right of blade - 52 in: 52 1/2″ (w/ 52″ rails)
Max. rip, left of blade: 16 1/2″ (w/ 30" Std. Fence)
Max. rip, left of blade (options): 12 1/2" (w/ T-Glide Fence)
Dado diameter: 8″ (req. dado brake + insert)
Dado max. width: 13/16"
Arbor diameter at blade: 5/8″
Main bearing size: 62mm OD x 30mm ID
Second bearing size: 52mm OD x 25mm ID
Table in front of blade (max. elevation): 10 5/8"
Table behind blade (max. elevation): 7 1/8″
Arbor Runout: 0.001″ Maximum allowable runout
Table flatness measured diagonally: 0.016″ Maximum gap
Blade alignment with miter slot: 0.010″ Maximum displacement
Deviation of miter gauge indexing stops from actual: ±0.25º
Alignment between splitter and blade: 0.010″ Maximum difference
Miter slots T-shaped: 3/4″ at top, 1″ at bottom, 3/8″ deep
Miter slots center: 11 1/8″ center-to-center
Miter slots info: 5 1/2″ (arbor flange to center of right slot)
Dust collection port diameter: 4″ under table top
Riving knife / splitter thickness: 0.090" (2.3 mm)
Micro blade guard (standard on 1.75 HP saws): polycarbonate, extends 1″ right of blade
Dust collection blade guard (optional on 1.75 HP saws): polycarbonate, extends 1-3/16" right of blade
Blade guard (dust collection) port diameter: 1-1/2" Outside, 1-1/4" Inside
Insert: zero clearance, phenolic core, melamine surfaces
Hand wheels: 6″ diameter, cast alum. w/ ABS handle
Belts: V-ribbed belt – static dissipative
Overall saw dimensions: 44" w x 39 1/4" d x 34 3/4" h (body only)
Overall saw dimensions 30 in: 58 1/2" w x 40" d x 34 3/4" h
Overall saw dimensions 36 in: 69 1/8" w x 45" d x 34 3/4" h
Overall saw dimensions 52 in: 85 1/4" w x 45" d x 34 3/4" h
Motor configuration 1: CNS175: 1.75 HP, 120v, 14 A
Motor configuration 2: (user config. to 220v w/optional kit)
SawStop Safety System (01:21)
SawStop table saws exclusively feature the SawStop Safety System which stops the blade within 5 milliseconds of contact with skin. SawStop saws prevent serious injury and give operators peace of mind. Follow us on http://www.facebook.com/sawstop. Learn more on http://www.sawstop.com.
  • SawStop Safety System
    SawStop table saws exclusively feature the SawStop Safety Syst...

This product hasn't received any reviews yet. Be the first to review this product!

Write your own product review

Join us for exclusive deals and new releases!

  • Farrell News
  • Recent Updates

    View Cart Go To Checkout