Loading... Please wait...
  • Image 1
  • Image 2

10" Industrial Saw Cabinet (SawStop)

$3,899.00
SKU: UMB_ICS
Availability:
Contiguous 48 States
Brand:
SawStop
Shipping:
$350.00 (Fixed shipping cost)

10" Industrial Saw Cabinet (SawStop)
SawStop
UMB_ICS
Quantity:
Special Instructions:

UMB_ICS

SawStop 10" Industrial Cabinet Saw 

Maximum safety and performance for industrial and heavy duty-cycle environments. 

The SawStop is the safest tablesaw on the market. The SawStop tablesaw's unique brake design detects hand or finger contact with the sawblade, instantly stopping and retracting the blade helping to avoid serious injury.

The SawStop Industrial Cabinet Saw is a serious saw for serious shops. It weighs in at 530 pounds - before you install the fence. It is available with a variety of motors from 3hp to 7.5 hp with voltage and phase options to fit your needs. See the chart below for details. The SawStop Industrial Cabinet Saw comes with either a 36" or a 52" Industrial T-Glide Fence (choose above).

SawStop offers a full range of accessories for the ICS including a mobile base and an overarm dust extractor attachment. 

  • Thicker, deeper cast-iron table and wings
  • Industrial mobile base option
  • Cabinet base, industrial weight cabinet-mounted trunnion, interior motor
Cabinet footprint: 20″ w x 25″ d
Cast iron table: 24″ w x 30″ d
Cast iron table (w/ extension wings): 44″ w x 30″ d
Extension wings: 10" w x 30" d each
Extension table 30 in rails: N/A
Extension table 36 in rails: 24″ w x 30″ d
Extension table 52 in rails: 40″ w x 30″ d
Weights - table saw only: 530 lbs
Weights - w/ 36 in fence systems: 635 lbs
Weights - w/ 52 in fence systems: 685 lbs
Weights - (optional cast iron wings): N/A
Shipping weight (approx.): 640 lbs (table saw only)
Blade: Prof. grade, 5/8″ arbor
Blade diameter: 10"
Blade tilt: Left
Blade kerf: 0.118″ (3mm)
Blade plate thickness: 0.078″ (2mm)
Max. depth of cut, blade at 0º: 3-1/8″
Max. depth of cut, blade at 45º: 2-1/4″
Max. rip, right of blade - 36 in: 36-1/2″ (w/ optional 36″ rails)
Max. rip, right of blade - 52 in: 52-1/2″ (w/ optional 52″ rails)
Max. rip, left of blade: 12-1/2″
Max. rip, left of blade (options): N/A
Dado diameter: 8″ (requires a separate brake cartridge and insert)
Dado max. width: 13/16″
Arbor diameter at blade: 5/8″
Main bearing size: 62mm OD x 30mm ID
Second bearing size: 52mm OD x 25mm ID
Table in front of blade (max. elevation): 10 3/4″
Table behind blade (max. elevation): 10″
Arbor Runout: 0.001″ Maximum allowable runout
Table flatness measured diagonally: 0.010″ Maximum gap
Blade alignment with miter slot: 0.010″ Maximum displacement
Deviation of miter gauge indexing stops from actual: ±0.25º
Alignment between splitter and blade: 0.010″ Maximum difference
Miter slots T-shaped: 3/4″ at top, 1″ at bottom, 3/8″ deep
Miter slots center: 11 1/8″ center-to-center
Miter slots info: 5 1/2″ (arbor flange to center of right slot)
Dust collection port diameter: 4"
Riving knife / splitter thickness: 0.090" (2.3 mm)
Micro blade guard: polycarbonate, extends 1″ right of blade
Dust collection blade guard (standard on 3 HP saws): polycarbonate, extends only 1-3/16" to right of blade
Blade guard (dust collection) port diameter: 1-1/2" Outside, 1-1/4" Inside
Insert: zero clearance, phenolic core, melamine surfaces
Hand wheels: 8″ diameter, cast iron w/ chrome handle
Belts: 2 V-ribbed belts
Overall saw dimensions: 44″ w x 34″ d x 34″ h
Overall saw dimensions 36 in: 69 1/4″ w x 36 1/2″ d x 34″ h
Overall saw dimensions 52 in: 85 1/4″ w x 36 1/2″ d x 34″ h
Motor configuration 1: ICS31230: 3 HP, 1 phase, 230v, 13 A
Motor configuration 2: ICS51230: 5 HP, 1 phase, 230v, 19.7 A
Motor configuration 3: ICS53230: 5 HP, 3 phase, 230v, 12 A
Additional Available Power Options:  
Motor configuration 4: ICS53480: 5 HP, 3 phase, 480v, 5.8 A
Motor configuration 5: ICS53600: 5 HP, 3 phase, 600v, 4.8 A
Motor configuration 6: ICS73230: 7.5 HP, 3 phase, 230v, 17.8 A
Motor configuration 7: ICS73480: 7.5 HP, 3 phase, 480v, 9 A
Motor configuration 8: ICS73600:7.5 HP, 3 phase, 600v, 6.9 A

 

SawStop Industrial Saws do NOT come with a power cord or plug. Your electrical service connection to the saw should be performed by a qualified electrician in accordance with your state and local electrical codes.

SawStop Safety System (01:21)
SawStop table saws exclusively feature the SawStop Safety System which stops the blade within 5 milliseconds of contact with skin. SawStop saws prevent serious injury and give operators peace of mind. Follow us on http://www.facebook.com/sawstop. Learn more on http://www.sawstop.com.
  • SawStop Safety System
    SawStop table saws exclusively feature the SawStop Safety Syst...

Join us for exclusive deals and new releases!

  • Farrell News
  • Recent Updates

    View Cart Go To Checkout