Loading... Please wait...
  • Image 1
  • Image 2

16 Oz. Dual Tube Rezi-Weld LV State (Pro-Poxy 100) (W.R. Meadows)

Call or request quote.
SKU: MD4351
W.R. Meadows

16 Oz. Dual Tube Rezi-Weld LV State (Pro-Poxy 100) (W.R. Meadows)
W.R. Meadows
Special Instructions:


Rezi-Weld LV State - 16 Oz. Dual Tube

Ultra-Low Viscosity Injection Epoxy

REZI-WELD LV STATE is an ultra-low viscosity, two-component, 100% solids, rapid setting, epoxy-based, structural injection resin. It is a solvent-free, low odor, high strength, high modulus, moisture-insensitive, ultra-low viscosity epoxy resin system. REZI-WELD LV STATE resists most chemicals and forms a structural, monolithic bond with typical concrete.

Its low surface tension facilitates deep penetration into hairline to medium-sized cracks. The 100% solids formulation is volumetrically stable, ensuring a solid bond to both sides of the crack.

REZI-WELD LV STATE is designed for gravity feeding or pressure injecting. It is available in two cartridge sizes for ease of use. It is also available in bulk units and may be injected using two-component metering pumps. It is suitable for injecting fine, non-moving structural cracks in concrete and wood for long-term repairs. REZI-WELD LV STATE makes an economical, easy-to-use epoxy mortar for patching or repairing defects in concrete substrates.


  • Ultra-low viscosity is ideal for pressure injection and gravity feeding.
  • Advantageous as a low viscosity, epoxy adhesive binder.
  • Bonds cured concrete to wood, steel, or plastic concrete.
  • Combines with aggregate to form an interior, non-skid topping.
  • Resists industrial chemicals, as well as impact and attack from moisture.
  • Features low-viscosity, high-modulus, high-strength, self-leveling characteristics.

6.1 Oz. (180 mL) Cartridges
16 Oz. (475 mL) Cartridges
3 Gallon (11.4 L) Units
15 Gallon (57 L) Units

One gallon (3.8 L) neat covers approximately 85 -100 ft.2/gal. (2.1 – 2.7 m2/L), depending on surface porosity and end use application. One gallon (3.8 L) mixed 1:1 with dry aggregate yields approx. 350 in.3 (5735 cm3) of grout.


ASTM C 881-99 Type I, II, IV and V, Grade 1, Classes B & C
AASHTO M 235 Type I, II, IV and V, Grade 1, Classes B & C
Various departments of transportation approvals


7 Day Cure
@ 77º F (25º C)
Typical Data Test Method
Viscosity, cps 450 – 550 ASTM C 881
Tensile Strength, psi 7,200(49.6 MPa) ASTM D 638
Elongation, % 8.8 ASTM D 638
Hardness, Shore D 85 ASTM D 2240
Flexural Strength, psi 8500(55.2 MPa) ASTM D 790
Compressive Yield Strength, psi 12,000(14.4 MPa) ASTM D 695
Compressive Modulus, psi 260,000(1,800 MPa) ASTM D 695
Bond Strength, psi (2 days) 2,100(14.4 MPa) ASTM C 882
Bond Strength, psi (14 days) 3,000(20.6 MPa) ASTM C 882
Heat Deflection Temperature 120º F (48º C) ASTM D 648
Absorption, % (24 hours) 0.23% ASTM D 570
Linear Coefficient of Shrinkage 0.004 ASTM D 2566
Component Properties Resin Hardener
Mix Ratio
(PBV=Parts by Vol.)
Appearance Clear Amber
Pot Life (1000 gms)@ 75º F (21.5º C) 20 -30 Min. ASTM C 881
Tack-Free Time 
@ 30 mils
@ 70F (21.1° C)
4-5 Hrs. ASTM C 879
VOC Content 5 g/L

WARNING: California's Proposition 65

REZI-WELD Structural Crack Repair (05:39)
https://www.wrmeadows.com/ Step 1 - Surface Preparation: Remove any loose concrete, paint or high spots. Set the concrete ports at a distance equal to or slightly greater than the width of the concrete element depth. http://www.wrmeadows.com Step 2 - Set the Injection Ports: Use REZI-WELD GEL PASTE to seal and secure the ports to the wall. REZI-WELD GEL PASTE is a high viscosity, rapid setting, thixotrophic, structural, epoxy-based, chemical anchoring/bonding adhesive and injection resin. A suitable cure time prior to injecting would be overnight. Step 3 - Inject the crack with REZI-WELD LV STATE: REZI-WELD LV STATE is an ultra-low viscosity, rapid setting, epoxy-based, structural injection resin. This anchoring adhesive and injection resin is moisture insensitive and provides high mechanical properties and bond strength to concrete and various other substrates. Inject until it flows out of the next open port. Plug the port. Fill and plug from the bottom up, plugging each port as you go.
  • REZI-WELD Structural Crack Repair
    https://www.wrmeadows.com/ Step 1 - Surface Preparation: Remov...

This product hasn't received any reviews yet. Be the first to review this product!

Write your own product review

Join us for exclusive deals and new releases!

  • Farrell News
  • Recent Updates

    View Cart Go To Checkout